Jiangsu, China
Business Type:
Manufacturer/Factory & Trading Company
Number of Employees:
Year of Establishment:
Management System Certification:
Average Lead Time:
Peak season lead time: 1-3 months
Off season lead time: 1-3 months
OEM/ODM Service

Vacuum Oven, Vacuum Oven for Medicine, Industrial Vacuum Oven manufacturer / supplier in China, offering Industrial Vacuum Oven for Medicine Extract with Good Temperature Evenness, Steam and Air Mixture Sterilizer for Mask and Soft Bag, Steam and Air Mixture Sterilization Autoclave and so on.

Diamond Member Since 2010
Audited Supplier
Supplier Homepage Products Others Industrial Vacuum Oven for Medicine Extract with Good Temperature Evenness

Industrial Vacuum Oven for Medicine Extract with Good Temperature Evenness

Min. Order / Reference FOB Price
1 Piece US $125,000/ Piece
Port: Shanghai, China
Production Capacity: 200
Payment Terms: L/C, T/T
Movement Way: Fixed
Flow: Cross Flow
Heating Mode: Transmission
Material Status: Cream
Drying Medium: Superheated Steam
Operational Method: Intermittent

You Might Also Like


Basic Info

Continuous Vacuum
Transport Package
High Quality Wooden Case
20FT container
HS Code
Product description

First, the use of low temperature vacuum drying oven

This series of low temperature vacuum drying ovens are suitable for drying heat sensitive materials that are easily decomposed, polymerized or deteriorated at high temperatures. It can be disinfected before drying, and no impurities are mixed into the material during the drying process. It belongs to the static vacuum dryer, so the shape of the dry material will not be damaged, and it is widely used in the pharmaceutical, food, chemical, electronics and other industries.

Second, the principle of low temperature vacuum drying oven:

The dried material is subjected to heating and drying under vacuum conditions, and the low-temperature vacuum drying box uses a vacuum pump to perform pumping and dehumidification, thereby accelerating the drying rate. When the heating temperature is constant and the degree of vacuum is increased, the drying rate can be increased. When the degree of vacuum is constant, the heating temperature is increased to accelerate the drying rate. By increasing the degree of vacuum and increasing the heating temperature, the drying rate is greatly accelerated. If a condenser is used, the solvent in the material can be recovered by a condenser. If SK series water ring vacuum pump or ZSWJ series water jet vacuum pump unit is used, the condenser can be omitted.

Third, the characteristics of the vacuum drying oven:

1. The system achieves balance by controlling the heating-vacuum, so that the whole process of the material is in a moderate to high boiling state without overflowing (monitoring);

2. The material is dried in a boiling state, and the dipstick block is in a loose porous state. After pulverization, the fine powder has a small bulk density and is more soluble;

3. The design of the drying box through the heating plate layer has a larger heating area than the conventional vacuum box, and the heating is more uniform;

4. In order to facilitate the simultaneous drying of each material, it is designed to have higher requirements for the flatness of the heating material and the heating plate;

5. The low-temperature vacuum drying box uses compressed gas/steam to form a "gas needle/air knife" to effectively pierce/cut the crust, speed up the concentration process, avoid spillage caused by bumps, and effectively supplement the inertia through the device. The gas forms an effective protection for the material, ensures the excellent color of the active material and the material, and at the same time effectively improves the drying speed by convection;

6, side multi-channel vacuum / qi, so that the vacuum inside the system, after the use of the layer heating, still uniform, while effectively avoiding the condensed water back into the material, causing local non-drying and affecting the drying speed;

7. Optional nitrogen generator can effectively utilize the heat generated during the nitrogen production process while enjoying the inert material protection, and the most efficient energy saving;

8. Optional steam recovery unit for maximum energy saving;

9. Optional CIP cleaning system (with steam cleaning, soaking, spraying and other cleaning modes);

10, low-temperature vacuum drying oven can choose steam, hot water and other heat sources for heating;

11. Optional industrial one-piece machine with touch screen, with the control system conforming to the GAMP5 rule, one-button operation on the equipment;

12. The low-temperature vacuum drying oven control system has functions such as data online printing and paperless recorder recording process data.

Fourth, the main technical parameters of low temperature vacuum drying oven:
External measurement(L×W×H) mm4800*2000*2200
Heating layer10layers
Layer height mm122
Layer measurement mm460×640×50(70),1.2mm
Tray quantity120
Allow pressure MPa≤0.784
Experimental pressure in the drying tube (water pressure) MPa≤1.0
Chamber temperature ºC≤80
No-load vacuum in the box torr≤30 (At a vacuum of 30 Torr and a heating temperature of 110 ° C, the gasification rate of water is 7.2 kg/m2.h))
Chamber experimental pressure (water pressure) MPa0.2
Heating size m272
Heating methodHot water, steam
Dryer weight kg6000
Installation diagram
Industrial Vacuum Oven for Medicine Extract with Good Temperature Evenness

High quality wooden case package
Industrial Vacuum Oven for Medicine Extract with Good Temperature Evenness


Send your message to this supplier

avatar Mrs. Yiying Zhao

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

People who viewed this also viewed